ARRI L7-C LE2 LED Fresnel
₨0.00 Rs
The ARRI L7-C LE2 shares many characteristics with its predecessor, but the most obvious improvement is a 25% boost in power, increasing the light’s tungsten equivalency from 750W to 1000W. This stand/manual mount version has a yoke with a 1-1/8″ Junior pin.
The key characteristic of any Fresnel is flood-to-spot capability, and the L7-C LE2 meets and exceeds expectations with an impressive beam angle of 15-50°. There’s no learning curve when swapping out L7-C LE2 fixtures for fixtures with standard Fresnels. In fact, you’re not going to be moving them around or juggling scrims in high places thanks to the 100 – 0% on-board dimming.
Attributes and Benefits
- L7-C LE2s with Light Engine 2 are 25% brighter than previous versions
- Fully tuneable from 2800 – 10,000K
- Plus/Minusgreen correction
- Vibrant color selection (RGB+W color gamut)
- Hue and saturation control
- High color rendering
- Low power consumption (160W nominal)
- Fully dimmable
- True Fresnel lens light characteristics from LEDs
- Onboard DMX In and Out
- RDM implementation
- USB Mini connection for firmware updates
- Fan mode selection
The ARRI L7-C LE2 shares many characteristics with its predecessor, but the most obvious improvement is a 25% boost in power, increasing the light’s tungsten equivalency from 750W to 1000W. This stand/manual mount version has a yoke with a 1-1/8″ Junior pin.
MediaVision rents this from Mauritius for lighting crews across the Indian Ocean.
Key capabilities
- ARRI light as listed
- This stand/manual mount version has a yoke with a 1-1/8″ Junior pin
- The key characteristic of any Fresnel is flood-to-spot capability, and the L7-C LE2 meets and exceeds expectations with an impressive beam angle of 15-50°
- There’s no learning curve when swapping out L7-C LE2 fixtures for fixtures with standard Fresnels
- In fact, you’re not going to be moving them around or juggling scrims in high places thanks to the 100 – 0% on-board dimming
- Typical use: lighting a scene on studio stages and locations
- Held as the listed item for rental; exact kit on quote
Technical specifications
| Brand | ARRI |
|---|---|
| Category | Lighting Equipment |
What’s included
Typically the listed item as rented by MediaVision. Exact kit contents and quantities are confirmed on the quote; extra accessories are not assumed.
Rental & crew
Stocked by MediaVision in Mauritius and available for productions across the Indian Ocean. Technical film crew can be arranged on request. Share your dates and package and we will return availability and a quote.
Related products
ARRI M40
A member of the ARRI M-Series, the M40 is a lens-less system that unifies the advantages of Fresnel and PAR fixtures. The unit is open face and thus very bright: around 30 % brighter than an AS40 in spot. Due to its unique, patented MAX Technology reflector, it is also focussable over a range of 18 to 52° Half Peak Angle. The M40 gives a remarkably even beam spread that casts crisp shadows over the whole focus range. The reflector characteristics is optimised for 4,000 W lamps, but can also be used with 2,500 W lamps.
ARRILITE 2000 Plus
The continuing popularity of the ARRILITE 2000 has inspired ARRI’s lighting team to undertake a complete redesign and update of this traditional, open-faced lamphead. Incorporating a range of innovative features, the new ARRILITE 2000 Plus meets the exacting production demands of today’s film and television industries. By utilizing the ARRIMAX reflector and optical system, light efficiency is increased and light distribution improved.
LiteGear – LiteMat Plus 2 “DUO” Kit
The LiteMat Plus 2 is one of the most affordable, professional cinema lighting fixture available today. It’s square size allows for traditional setups. The LiteMat+ Plus 2 is based on two “tiled” light engines, each measuring 9.5 in. x 19 in. (240 mm x 480 mm). The head unit features 1152 new CineMitter LEDs and is covered by a thin, clear polycarbonate layer and bordered entirely with Velcro® “loop” fastener.
Aladdin Fabric-Lite 350W Bi-Color Kit with V-Mount Battery Plate
The kit includes the Fabric-Lite 3 x 3' Flexible LED Mat with storage pouch, two multi-voltage AC power supplies, a dimmer with built in DMX and LumenRadio wireless DMX, and 6.6' and 16.4' extension cables. Also included is a frame to turn the Fabric-Lite into a rigid panel, as well as a diffuser, a honeycomb grid, and a soft case to carry it all in.
Matthews Low Boy Combo Stand 2XR
Matthews 366066 Low Boy Double Riser Combo Lighting Stand - Steel. A Stand with an attitude. Wider footprint and longer legs provide increased stability. Complete with Rocky Mountain Leg and steel construction. Available with aluminium risers upon request. Will accept Matthews #366068 Combo Adapter Wheels.
Manfrotto Heavy Duty Stand, Black, Air-Cushioned, Black Steel
Lightweight, secure, and dependable, this Air-cushioned Heavy Duty Junior Stand gets the job done with ease. Manufactured in Italy and meeting only the highest quality of design standards, it’s a powerful addition for on-the-go photographers and videographers.
Perfect for both indoor and outdoor use, this stand is a must-have piece of equipment for both studio and location-based content creators and image makers. Benefiting from air-cushioning is that it keeps your movements smooth and sure, but you also won't need to worry about damage to your photography equipment or catching your fingers during accidental retraction. In addition to features such as a levelling leg and double-braced legs it provides a solid support, no matter the environment. Rest assured knowing that your equipment is secure thanks to the stands locking features and professional design.
