Avenger 3 Section Crank Stand (B7034)
₨0.00 Rs
Chrome-plated steel stand with three risers that adjust via its winch-cable drive. Made for supporting very heavy loads, the stand has a 264.55 lb load capacity and reaches a height of 11′. Its low minimum height and center of gravity allow safe mounting of heavy fixtures.
| Brand | Avenger |
|---|
Chrome-plated steel stand with three risers that adjust via its winch-cable drive. Made for supporting very heavy loads, the stand has a 264.55 lb load capacity and reaches a height of 11′.
MediaVision rents this from Mauritius for lighting crews across the Indian Ocean.
Key capabilities
- Avenger stand as listed
- Height 11′
- Crank / wind-up height adjustment as named
- Chrome-plated steel stand with three risers that adjust via its winch-cable drive
- Made for supporting very heavy loads, the stand has a 264.55 lb load capacity and reaches a height of 11′
- Its low minimum height and centre of gravity allow safe mounting of heavy fixtures
- Typical use: supporting lights, overheads or modifiers on studio and location sets
Technical specifications
| Brand | Avenger |
|---|---|
| Category | Lighting Equipment > Stands |
| Height | 11′ |
What’s included
Typically the listed item as rented by MediaVision. Exact kit contents and quantities are confirmed on the quote; extra accessories are not assumed.
Rental & crew
Stocked by MediaVision in Mauritius and available for productions across the Indian Ocean. Technical film crew can be arranged on request. Share your dates and package and we will return availability and a quote.
Related products
ARRI M40
A member of the ARRI M-Series, the M40 is a lens-less system that unifies the advantages of Fresnel and PAR fixtures. The unit is open face and thus very bright: around 30 % brighter than an AS40 in spot. Due to its unique, patented MAX Technology reflector, it is also focussable over a range of 18 to 52° Half Peak Angle. The M40 gives a remarkably even beam spread that casts crisp shadows over the whole focus range. The reflector characteristics is optimised for 4,000 W lamps, but can also be used with 2,500 W lamps.
LiteGear – LiteMat Plus 3 “DUO” Kit
The LiteMat Plus 3 is one of the most affordable, professional cinema lighting fixture available today. The LiteMat+ Plus 3 is based on three “tiled” light engines, each measuring 9.5 in. x 19 in. (240 mm x 480 mm). The head unit features 1152 new CineMitter LEDs and is covered by a thin, clear polycarbonate layer and bordered entirely with Velcro® “loop” fastener.
LiteGear – LiteMat Plus 2 “DUO” Kit
The LiteMat Plus 2 is one of the most affordable, professional cinema lighting fixture available today. It’s square size allows for traditional setups. The LiteMat+ Plus 2 is based on two “tiled” light engines, each measuring 9.5 in. x 19 in. (240 mm x 480 mm). The head unit features 1152 new CineMitter LEDs and is covered by a thin, clear polycarbonate layer and bordered entirely with Velcro® “loop” fastener.
Avenger A1035CS Combo Stand 35 Chrome Steel w/Universal Head
The Avenger A1035CS Chrome Steel Combo Stand with Leveling Leg is a heavy duty stand capable of holding a 40kg load at a height of 3.5m. This chrome steel combo stand has a combo style or universal type top which incorporates a 28mm Junior Receiver and a built-in retractable 16mm non-threaded baby pin. The built-in leveling leg allows for easy set-up on uneven terrain and surfaces. Additionally the mobile column which is secured by 2 locking T-handles in the spider castings allows for lowering the column to give the user a 4th touch point for extra stability if needed. Captive T-handles means you don't run the risk of losing handles even if they fully unscrew.
Manfrotto Heavy Duty Stand, Black, Air-Cushioned, Black Steel
Lightweight, secure, and dependable, this Air-cushioned Heavy Duty Junior Stand gets the job done with ease. Manufactured in Italy and meeting only the highest quality of design standards, it’s a powerful addition for on-the-go photographers and videographers.
Perfect for both indoor and outdoor use, this stand is a must-have piece of equipment for both studio and location-based content creators and image makers. Benefiting from air-cushioning is that it keeps your movements smooth and sure, but you also won't need to worry about damage to your photography equipment or catching your fingers during accidental retraction. In addition to features such as a levelling leg and double-braced legs it provides a solid support, no matter the environment. Rest assured knowing that your equipment is secure thanks to the stands locking features and professional design.
