Scubacam Underwater Housing / Splash-Bag
Scubacam’s range of housings is designed to be operated just above the water surface or down to 4m below it, or in very dusty or dirty environments.
Supported by a lightweight yet strong anodised aluminium framework, the Scubacam splash housings are made from very hard-wearing, robust polyurethane and are sealed with a specialised YKK watertight zip made to the U.K. M.o.D. specifications, which is welded to the housing, ensuring a 100% watertight seal.
The camera is inserted through the zip, and the housing is rendered waterproof by closing the zip. The clear heat-sealed PVC windows allow the user to view the camera menus, displays and indicators. All the joins and seams of the unit are double-stitched and taped on both sides for added security.
Scubacam splash bags require minimal tools to install, operate, and remove the camera assembly – A “dry” studio rig can be installed with almost no adjustments due to the ARRI standard dovetail inside all housings. All other operating adjustments are designed to be done by hand.
| Brand | ARRI |
|---|
Scubacam’s range of housings is designed to be operated just above the water surface or down to 4m below it, or in very dusty or dirty environments. Supported by a lightweight yet strong anodised aluminium framework, the Scubacam splash housings are made from very hard-wearing, robust polyurethane and are sealed with a specialised YKK watertight zip made to the U.K.
Media Vision rents this from Mauritius for productions across the Indian Ocean, including Réunion, Madagascar, the Seychelles and the Maldives.
Key capabilities
- ARRI housing as listed
- Scubacam’s range of housings is designed to be operated just above the water surface or down to 4m below it, or in very dusty or dirty environments
- M.o.D. specifications, which is welded to the housing, ensuring a 100% watertight seal
- The camera is inserted through the zip, and the housing is rendered waterproof by closing the zip
- The clear heat-sealed PVC windows allow the user to view the camera menus, displays and indicators
- Typical use: camera department support on a film or stills set
- Held as the listed item for rental; exact kit on quote
Technical specifications
| Brand | ARRI |
|---|---|
| Category | Camera Equipment > Accessories |
What’s included
Typically the listed item as rented by Media Vision. Exact kit contents and quantities are confirmed on the quote; extra accessories are not assumed.
Rental & crew
Stocked by Media Vision in Mauritius and available for productions across the Indian Ocean. Technical film crew can be arranged on request. Share your dates and package and we will return availability and a quote.
Related products
Nikon ZR 6K Full-Frame Cinema Camera
The Nikon ZR is the first camera in the Z CINEMA line, developed with RED. A 24.5MP full-frame sensor recording 12-bit REDCODE RAW internally at 6K/59.94p and 4K/120p, with 15+ stops of dynamic range, R3D NE colour science and the world’s first 32-bit float audio recording. Available for rental in Mauritius.
ARRI AMC-1 Active cforce Motor Controller with LBUS Interface
The ARRI AMC-1 Motor Controller remotely control focus, iris, and zoom via an LBUS interface. The AMC-1 Controller can link up to three daisy-chained cforce motors, and is compatible with WCU-4, SXU-1, Master Grip, and cmotion units. Compatible cameras include the ARRI ALEXA, AMIRA, and a wide variety of third-party cameras. The AMC-1 mini motor-controller features a compact design, suiting it for handheld, gimbal, drone, and other lightweight camera configurations.
IDX System Technology CUE-D150 146Wh Li-Ion V-Mount Battery
The CUE-D150 V-Mount battery answers to the power demands of digital cinematography and broadcast cameras where high current loads of 10A/120W are standard. The CUE-D150 provides a robust 146Wh capacity with the ability to comfortably handle 10A/120W loads, as well as a single built-in D-Tap output capable of taking a 50W load for powering ancillary accessories.
