Wombat Camera Sling
₨0.00 Rs
The Wombat camera sling is 100% Australian designed and manufactured from Aussie oilskin material. Durable but super lightweight, the Wombat is tough!
Made from 400 GSM material, it features a super tight German polyester thread count. The Wombat has been tested throughout the Australian outback to ensure it can withstand everything you can throw at it! Its mildew resistant, UV resistant and water resistant.
The Wombat is designed to a specific size to meet all demands. Whether under-slinging a medium to small camera, supporting your elbow with a large camera or shooting a fixed position or time-lapse … this support is perfect. More people are choosing these supports over bulky body worn rigs.
Careful consideration from the design team has allowed them to produce the lightest camera support of it’s type, weighing in at a mere 375 grams (13 oz).
Specifications:
- Dimensions 38cm L x 27cm H x 27cm W
- Weight 375 grams. 13oz. 0.8 lbs
- Load: Up to 15kgs (33 lbs)
Shoulder Strap:
The Wombat comes with a heavy duty adjustable crossover shoulder webbing strap. Fully adjustable between 83cm – 153cm.
The Wombat camera sling is 100% Australian designed and manufactured from Aussie oilskin material. Durable but super lightweight, the Wombat is tough!
MediaVision stocks this camera item in Mauritius for productions across the Indian Ocean.
Key capabilities
- Camera as listed: Wombat Camera Sling
- The Wombat camera sling is 100% Australian designed and manufactured from Aussie oilskin material
- Durable but super lightweight, the Wombat is tough!
- Made from 400 GSM material, it features a super tight German polyester thread count
- The Wombat has been tested throughout the Australian outback to ensure it can withstand everything you can throw at it!
- Typical use: camera department support on a film or stills set
- Held as the listed item for rental; exact kit on quote
Technical specifications
| Category | Camera Equipment > Accessories |
|---|
What’s included
Typically the listed item as rented by MediaVision. Exact kit contents and quantities are confirmed on the quote; extra accessories are not assumed.
Rental & crew
Stocked by MediaVision in Mauritius and available for productions across the Indian Ocean. Technical film crew can be arranged on request. Share your dates and package and we will return availability and a quote.
Related products
ARRI CLM-5 Motor Basic Set
The components in this ARRI CLM-5 Motor Basic Kit are used with an ARRI motor controller (available separately) to remotely control your lens's focus, iris, or zoom function. The lightweight, compact CLM-5 motor features smooth, responsive control for smaller lenses. This CLM-5 Motor Basic Kit can be used with ARRI's UMC-4 Universal Motor Controller or SMC-1 Single Motor Controller.
The included drive gear works with select cine-style lenses, and can be attached to either side of the CLM-5 Motor. This kit includes a motor-to-controller cable, and a bracket with insert for mounting to a standard 19mm or 15mm rod.
Bebob CUBE 1200 Multi-Voltage Battery
The CUBE 1200 Multi-Voltage Battery from bebob is a lithium-ion source that can run an ARRI SkyPanel S60, for instance, for 2.5 hours at full power on an 8-hour charge. The CUBE 1200 can provide 5, 12V, 24, and 48V, making it a versatile solution for high-performance devices. Connectors include three 12V outputs (1 x D-Tap, 2 x XLR), two 24V outputs, and one 48V output (all XLR). In addition, two 5V USB outputs allow external devices like smartphones and tablets to be charged and operated. The CUBE 1200 has an integrated charger, accepting 90-264V / 47-63 Hz AC in, for an eight-hour full capacity charge time.
Scubacam Underwater Housing / Splash-Bag
Scubacam's range of housings is designed to be operated just above the water surface or down to 4m below it, or in very dusty or dirty environments.
Supported by a lightweight yet strong anodised aluminium framework, the Scubacam splash housings are made from very hard-wearing, robust polyurethane and are sealed with a specialised YKK watertight zip made to the U.K. M.o.D. specifications, which is welded to the housing, ensuring a 100% watertight seal.
The camera is inserted through the zip, and the housing is rendered waterproof by closing the zip. The clear heat-sealed PVC windows allow the user to view the camera menus, displays and indicators. All the joins and seams of the unit are double-stitched and taped on both sides for added security.
Scubacam splash bags require minimal tools to install, operate, and remove the camera assembly - A "dry" studio rig can be installed with almost no adjustments due to the ARRI standard dovetail inside all housings. All other operating adjustments are designed to be done by hand.
Lexar CR1 Professional Workflow CFast 2.0 USB 3.0 Reader
Use the CR1 Professional Workflow CFast 2.0 USB 3.0 Reader from Lexar by itself as a USB 3.0 compatible card reader, or combine it with a Workflow Hub from Lexar to create a complete storage solution. This modular card reader accepts CFast 2.0 memory cards and leverages the speed of USB 3.0 connectivity to provide enhanced data transfer rates allowing you to move large files quickly to and from the card.
- Transfers and backs up images and video from CFast 2.0 memory card
- Leverages USB 3.0 technology for high-speed transfer and backup of RAW images, high-res photos, and HD,
- 3D, and 4K video
- Innovative, modular design
- Use this reader with a hub or on the go
