ARRI L7-C LE2 LED Fresnel
₨0.00 Rs
The ARRI L7-C LE2 shares many characteristics with its predecessor, but the most obvious improvement is a 25% boost in power, increasing the light’s tungsten equivalency from 750W to 1000W. This stand/manual mount version has a yoke with a 1-1/8″ Junior pin.
The key characteristic of any Fresnel is flood-to-spot capability, and the L7-C LE2 meets and exceeds expectations with an impressive beam angle of 15-50°. There’s no learning curve when swapping out L7-C LE2 fixtures for fixtures with standard Fresnels. In fact, you’re not going to be moving them around or juggling scrims in high places thanks to the 100 – 0% on-board dimming.
Attributes and Benefits
- L7-C LE2s with Light Engine 2 are 25% brighter than previous versions
- Fully tuneable from 2800 – 10,000K
- Plus/Minusgreen correction
- Vibrant color selection (RGB+W color gamut)
- Hue and saturation control
- High color rendering
- Low power consumption (160W nominal)
- Fully dimmable
- True Fresnel lens light characteristics from LEDs
- Onboard DMX In and Out
- RDM implementation
- USB Mini connection for firmware updates
- Fan mode selection
The ARRI L7-C LE2 shares many characteristics with its predecessor, but the most obvious improvement is a 25% boost in power, increasing the light’s tungsten equivalency from 750W to 1000W. This stand/manual mount version has a yoke with a 1-1/8″ Junior pin.
MediaVision rents this from Mauritius for lighting crews across the Indian Ocean.
Key capabilities
- ARRI light as listed
- This stand/manual mount version has a yoke with a 1-1/8″ Junior pin
- The key characteristic of any Fresnel is flood-to-spot capability, and the L7-C LE2 meets and exceeds expectations with an impressive beam angle of 15-50°
- There’s no learning curve when swapping out L7-C LE2 fixtures for fixtures with standard Fresnels
- In fact, you’re not going to be moving them around or juggling scrims in high places thanks to the 100 – 0% on-board dimming
- Typical use: lighting a scene on studio stages and locations
- Held as the listed item for rental; exact kit on quote
Technical specifications
| Brand | ARRI |
|---|---|
| Category | Lighting Equipment |
What’s included
Typically the listed item as rented by MediaVision. Exact kit contents and quantities are confirmed on the quote; extra accessories are not assumed.
Rental & crew
Stocked by MediaVision in Mauritius and available for productions across the Indian Ocean. Technical film crew can be arranged on request. Share your dates and package and we will return availability and a quote.
Related products
ARRI 300 Plus
The ARRI Junior series is ideal for use where compact, lightweight tungsten fresnel spotlights are required, especially in small studios where grid height is a problem. Classic ARRI construction, using corrosion-resistant, extruded, die cast aluminium, maximises body strength while maintaining the light weight of a location fixture. Despite the small size of ARRI Junior lampheads, their short focal length, wide angle lenses produce impressive light output and good light distribution over the full beam area. ARRI Junior lampheads are available in both manual and pole-operated versions.
Dracast LED1000 Pro Bi-Color LED Light with V-Mount Battery Plate
The durable aluminum frame is supported by a sturdy, U-shaped yoke with locking knobs on each side and a standard 5/8" receiver. The LED1000 can be used worldwide, powered by the included 100-240 VAC adapter or by optional V-Mount 14.8V batteries. Accessories include optional 4-way barndoors for contouring and control of the LED1000's 45 degree beam angle. A carry case is included.
Aladdin Fabric-Lite 350W Bi-Color Kit with V-Mount Battery Plate
The kit includes the Fabric-Lite 3 x 3' Flexible LED Mat with storage pouch, two multi-voltage AC power supplies, a dimmer with built in DMX and LumenRadio wireless DMX, and 6.6' and 16.4' extension cables. Also included is a frame to turn the Fabric-Lite into a rigid panel, as well as a diffuser, a honeycomb grid, and a soft case to carry it all in.
Avenger Alu Master Stand (Black, 20′)
Avenger Combo Stand 20 is a black aluminium stand with 3 sections and 2 risers. It's a heavy duty stand that can support a payload up to 25kg and can reach a maximum height of 1.98m. It is also compatible with A900NB braked wheels which are sold separately. It has a 5/8'' (16mm) male stud top attachment and a 1''1/8 (28mm) female receiver. It also features 1 levelling leg to keep the stand steady on uneven surfaces.
